Gestetner c7425dn service manual

Free Shipping! Last Chance Corner. Precision Answers. Precision Printables. Cross-Reference Guide. Toner Buying Guide. Instruction Manuals. For Use In. Gestetner , , Lanier , , Ricoh , , Savin , In Stock.

Out of Stock. How soon will this item ship? Ricoh Limited Stock: 1 Left. For more information please visit our Shipping Page. Please contact us for options. In the [Job type:] box, click [Locked Print]. The next digit appears. The message [Deleted] appears, and then the Locked Print job selection screen appears. Checking the Error Log When a print job is not saved on the hard disk, it remains in the error log and can be checked using the control panel.

Page Form Feed Form Feed The message is displayed when there is no paper in the paper that does not agrees with the size and form specified by the printer driver, or there is no paper.

You can form feed using tray. Page Canceling A Print Job If the print job you want to cancel is being printed Check if the print job you want to cancel is currently being printed. While the print job may not be being printed, the printer is receiving data if the Data In indicator is lit or blinking. Page Mac Os - Canceling A Print Job If the print job you want to cancel is being printed Check if the print job you want to cancel is currently being printed. Page Select the name of the job you want to cancel.

Click the pause icon, and then click the trash icon. The print job will remain in the hard disk and be printed when the printer is turned on. Page Cover Therefore, if the cover paper is set to landscape orien- tation, the orientation cover and body will be different. For printing methods, see Printer Driver Help.

Memory Capacity and Paper Size Additional memory apart from standard memory may be required depending on the paper size and data type. Graphic Mode WL. Err Report Auto Continue The tray selected here is used when no tray is selected for a print job.

Also, you can check the types and characters of all the printable fonts. Printing a Configuration Page Follow the procedure below to print the configuration page. Page The version number of the network interface board is displayed. Log You can print the configuration page and error log.

Page You can print the current configuration of the printer. Page Maintenance Menu Making Printer Settings Using the Control Panel Maintenance Menu You can set printing conditions such as density and calibration, and printer man- agement such as formatting the optional hard disk unit. Changing the maintenance menu This section explains changing the maintenance menu using examples. Reinstall the optional hard disk unit. For details about the optional hard disk unit, see Setup Guide.

If you cannot install it properly even after attempting reinstallation, contact your sales or service repre- sentative. If the signal is unstable or unavailable, remove any obstructions or move the printer to a place to re- ceive the signal.

You can access [Menu Protect] on the dis- play panel. The printer can be used on factory default, but the configuration can be changed depending on the con- dition of the user. The changed condition holds even if the printer is turned off. Err Report You can select [On] or [Off] to have an error report printed when a printer error or memory error occurs.

When you select [Auto], the printer uses an alternative paper size if the currently specified paper is not loaded. When you select [Off], the printer uses any size paper in the current specified paper tray. Saver Timer You can select the lead time needed to switch to the Energy Saver mode.

You can access [Email Date] from the display panel. Page Host Interface Menu Making Printer Settings Using the Control Panel Host Interface Menu You can set configurations about network connections and communication when using parallel connection between the printer and the computer. The changed configuration holds even if the printer is turned off.

If printing operation is frequently interrupted by data from other ports, you can increase the timeout period. Page You can select the active protocol. This menu appears only when the optional You can access [USB Setting] from the display panel. Changing the PS menu Follow the procedure below to change the setting for data format. Changing the PDF menu Follow the procedure below to change the resolution setting.

For increased security, use this menu on the control panel to set the password directly. Changing the language menu Follow the procedure below to change the language. Top Page of Web Image Monitor appears.

Status Printer status, including the amount of remaining paper in paper trays and the amount of remaining toner, is displayed. This button is located on Top Page. Reset Device Click to reset the printer. If a print job is being processed, the printer will be reset after the print job is completed.

Downloading Help In the [OS] list, select the operating system. In the [Language] list, select the language. When there are multiple print- ers to manage, you can create groups and classify the printers to facili- tate management. A list of printers using the selected protocol appears. In the list, select a printer whose configuration you want to change.

Select a printer. In the list, select a printer you want to manage. On the [Tools] menu, click [User Management Tool]. Start SmartDeviceMonitor for Admin. Page Monitoring and Configuring the Printer Restricting Functions Follow the procedure below to restrict use of individual functions. Select the check box of the functions you want to restrict.

To obtain status details, click the printer in the list, and then click [Open] on the [Device] menu. Page On the [System] page, enter the device name in the [Device Name:] box and a comment in the [Comment] box, and click [Apply]. Click [Options While the network printer is printing, another user cannot access it until the job is finished.

In this case, SmartDeviceMonitor for Client tries to access the network printer until the retry interval expires. The dialog box for making notification settings appears. Use the IP address or the host name of the printer to start telnet. If you do not need to restrict printing, make the setting "0. The DNS server address and the domain name already designated are used for the registration. Page Info If interfaces are changed, the new interface inherits the configuration.

Smaller num- bers indicate higher priority. Page Set Monitoring and Configuring the Printer Use the "set" command to set the protocol information display "active" or "inac- tive".

After that, the printer does not synchronize with the NTP server. Page Monitoring and Configuring the Printer Parameter channel frequency channel no. To enable the WEP function, specify [on]; to disable it, specify [off].

Unit C Not Detected: Develop. Unit K Not Detected: Develop. Unit M Not Detected: Develop. Paper in Duplex Unit For details about printing a configuration page, see Printer configuration You can check the printer configuration using telnet. Description It is time to replace the development unit color. User Print request user name. Page Number of pages printed Active Printing or preparing for printing.

Waiting Waiting to be transferred to the printer. However, the print result may not be as required due to printer problems. Printing was not completed normally. Canceled An "rcp", "rsh", or "lpr" command print request was canceled, possibly due to the printing application. Not applicable to the "ftp" The system log can be viewed using the "syslog" command. In the print server mode The printer is not as- print session full Problem and solutions The inetd service has started.

Page Problem and solutions In the print server mode The print queue is not assigned to the printer. Using NWadmin, assign the print queue to the printer, and then restart it. In the print server mode The NetWare serv- ice has started. SMTPC: no smtp server.

SMTPC: failed to connect smtp server. Snmp over IP over is ready. Page WINS server is working properly. The WINS server was not specified. The printer name was successfully registered. The scope ID is incorrect. Open the [Printers] window from the [Start] menu.

The printer properties appear. On the [Sharing] tab, click [Shared as:]. Page Select the [Notify when using the print server] check box. Click [OK]. The dialog box for setting the expansion function closes. The client setting is completed. Page Select the object in which the printer is located, and then click [Create] on the [Object] menu.

In the [Class of new object] box, click [Printer], and then click [OK]. In the [Printer name] box, enter the printer name Select the [Define additional properties] check box, and then click [Create].

To change the printer name, enter a new name. In the [Remote Printer No. N ] box, enter the printer number. Use the same printer number created. Page Set up the network connection to a printer. Select the object in which the printer is located, and then click [Create] on the [Object] menu.

Page In the [Available objects] box, click the queue you created, and then click [OK]. In the [Printers] area, click the printer you assigned, and then click [Printer Number] Enter the printer number, and then click [OK]. Check the settings, and then click [OK]. The host names vary depending on the network environment. In other cases Add the IP address and host name of the network printer to the hosts file on the computer used for printing.

Methods of addition vary depending on operating systems. SAM to the same directory and name it When printing a binary file, set the file mode to binary. Specify files to be printed. Click the printer you want to use, and then click [Select]. Follow the procedure on option settings; otherwise close the [Chooser] dialog box.

Click the Adobe PS icon. In the [Select the PostScript Printer:] list, click the name of the printer you want to use, and then click [Setup]. Click [Configure]. A list of options appears. Double-click the [Mac OS 8 and 9] folder. Open the [AdobePS Component] folder on the hard disk. Double-click [Desktop Printer Utility].

Click [Create]. The following message appears. If the zone is set, select the zone from the second pop-up menu. No new settings for options not installed can be made. Start Print Center. Select the name of the connected printer from the list of printer models, and then click [Add]. Close the [Printer List] dialog box, and then quit Print Center. The default is active. Page Duplex Printing For details about deleting the job, see Duplex Printing Use this function to select duplex printing.

Page Color Mode Prints everything, including color documents, in black and white. Black and White printing is faster than Color. To stop black and white areas being printed with CMYK toner, select [Black and White] in the printer driver as well as in the application.

Page Color Setting No modification to the color setting. Displaying Printer Fonts You can display the available fonts currently downloaded to the printer. Fonts in the printer memory and hard disk drive can be displayed. Select [Display Printer's Fonts Page Before initializing, be sure to check the fonts on the hard disk drive. Before initializing, be sure to check the data on the hard disk drive.