Ntldr is missing download windows xp

At the end of the test you will get the results. If the drive fails any physical tests as opposed to file system corruption , it needs to be replaced. Of course, other components might be bad in your case. It was my opinion that you should start testing with the hard drive. I am not the wealthiest person and buying a new computer is at this time not an option I have. Thanks everyone for the help, and I hope you all have a great day. Cheers, Your friend, Christopher.

This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 8. Report abuse. Details required :. Cancel Submit. I would start troubleshooting by testing the hard drive, which may have failed. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site.

In reply to Malkeleah's post on April 3, See if your Windows 10 computer boots normally. Follow the method below to rebuild the MBR of your hard disk. Note: Before we start, a Windows installation disc is required. Type the following commands and press Enter after each to rebuild the MBR:. Alternatively, you can rebuild the MBR through a thrid-party tool. You can choose a trusted and safe one online.

If unfortunately none of the solutions above helps you fix the problem, we recommend that you check the SATA cable in your computer case. Hopefully this has fixed your problem.

That's not giving you a lot of detail, is it? Two program files copied from a Windows XP installation named "ntldr" and "ntdetect. And a text file named "boot. The contents of boot.

Go Back. I made the disk an executable to make it easier to make a floppy. Of course that only works for Microsoft OS's. If you back up system is Linux or any other alternative operating system, then use the fixntldrimg. You'll need a program like rawrite. You may also be able to do that linux command line in a Mac. But if you have an easy way to make a boot floppy on a Mac I don't know about, please let me know milescomer gmail.

If you give me a solution. If none of these options work for you, check out the What if I don't want to download a file from a website I don't trust? If you named your windows directory something like "shinyhappypeople" then open the boot. Save changes, and put the disk back in and continue on trying the 10 choices. If you do not see the screen come up with the different selections and immediately goes back to the "NTLDR is missing, press any key to restart" error, then you will need to change the "boot order" in your systems BIOS to first select the Floppy Drive sometimes called "Removable Media Drive" before it tries to boot to the Hard Disk sometimes called "Fixed Disk" drive.

Once there, try looking for a "Boot Order" screen that will list your floppy, cd-rom, and hard drives with a number, typically , look for instructions on the screen on how to make changes, and move your floppy to 1 and CD-ROM to 2, find a way to exit and be sure to save your changes.

Then we know that the programs are fine, and the 3 startup files are fine, but perhaps the MBR is incorrect. Correcting the MBR takes a few different directions, choose any of the following sections:. Performing a "Repair" installation of windows.

You can choose to repair a windows installation from the recovery console. Once you are logged in to your recovery console, select the number that represent your C: drive more than likely it will be 1. It will ask for your admin password, enter it you have one or just hit enter if you don't know it. Both of these files are located in the root directory of the primary hard drive.

COM should be the locations of these files on many computers. COM files to the root directory of the primary hard drive. Edit the boot.

If so, try the below recommendations. If you are attempting to add a new hard drive to the computer, make sure the drive is a blank drive.

If you are unsure if the new drive is blank, try booting from a bootable diskette and format the new hard drive. It's possible your computer's hard drive may have a corrupt boot sector or master boot record. These can be repaired through the Microsoft Windows Recovery Console by running the fixboot and fixmbr commands. If you have tried each of the above recommendations that apply to your situation and you continue to receive the NTLDR error, there may be a more serious corruption issue in Microsoft Windows.

Therefore, we would recommend reinstalling Microsoft Windows. If you are encountering this issue during your setup, you may want to completely erase your computer hard drive and all its existing data and re-install Microsoft Windows. Disconnect and then reconnect the cable, making sure that the connection is snug and secure. If the issue continues, it is also a possibility that the computer has a faulty cable, try replacing the hard drive cable with another cable or a new cable.

If none of the above suggestions work to resolve the issue, there is a strong possibility the hard drive is bad and needs to be replaced. You can try installing a new hard drive and installing Windows on that hard drive to see if that resolves the issue.

The most common reason for this error is when your computer is trying to boot from a hard drive or flash drive that is not properly configured to be booted from. In other words, it's trying to boot from a non-bootable source. This also would apply to media on an optical drive or floppy drive that you're trying to boot from. Other possible causes include corrupt and misconfigured files, hard drive and operating system upgrade issues, corrupt hard drive sectors, an outdated BIOS, and damaged or loose IDE cables.